|
|
| Edelbrock.com - CARBS & ACCESSORIES - Carburetors |
|
|
Thunder Series AVS Carbs
Now, Edelbrock engineers have taken a great carb and made it even better with the exciting Edelbrock Thunder Series AVS! Designed and calibrated to deliver optimum street performance in hundreds of applications, Edelbrock Thunder Series AVS carbs are undeniably the most innovative and dependable street performance carburetors available today. Thunder Series AVS carbs have outstanding features like the Qwik-Tune secondary air valve and share all the performance advantages of the popular Edelbrock Performer Series. Features like a sturdy 2-piece body, no power valves to blow for superior reliability and a design that's simple to tune to your needs make the Edelbrock AVS Thunder Series carburetors the best you can buy.
Optimize For Your Vehicle
Our unique Qwik-Tune Adjustable Valve Secondary allows you to adjust the secondaries with simple tools... no springs required. Use a late opening for heavy vehicles with higher gears or an early opening for light vehicles with lower gears. Edelbrock carbs deliver optimum performance for whatever you drive.
Cool Custom Look
Edelbrock Thunder Series AVS carbs have a CNC-machined and profiled front face for a smooth clean look. Distinctive black hardware delivers a totally custom appearance. Looks as hot as they perform!
Available For Off-Road
Designed specifically to stand up to the tough 4x4 environment, these Thunder Series AVS carbs include spring loaded needles and seats for consistent fuel supply over rough terrain. The side-mounted fuel chambers are less likely to flood while climbing hills... no need for extended vent tubes. 650 cfm size is ideal for most small-block V8s.
Proven Performance
These carburetors have the same great features as our proven and dependable Performer Series line such as: float levels set at the factory so adjustments are rarely needed for "bolt on and run" performance; 2-step metering rods for independent tuning of cruise and power circuits; change jets, adjust floats or replace needles and seats without draining fuel. Of course, expert technical support is provided with all Edelbrock products. Contact the Edelbrock Tech line: 1-800-416-8628, 7am-5pm PST, M-F, or go to our web site for the latest Technical Information.
Unique Features of Edelbrock's Thunder Series AVS Carburetor
Adjustable Valve Secondary allows for simple and accurate tuning across the RPM range
Attractive black accents and CNC profiled front face for a custom look
Exclusive twelve month Thunder Series AVS "complete satisfaction" warranty
Optional single or dual fuel inlet allows for total fuel plumbing flexibility
The same outstanding features as the dependable Edelbrock Performer Series line and more!
Absolutely the Best Performing "Street Performance" Carburetor Ever to be Offered
What makes the Thunder AVS the best Street Performance Carburetor available? Newly designed primary and secondary booster clusters offer the most accurate and up to date calibration available of today's blended fuels and octane levels. The Thunder Series' unique AVS feature allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It's quick. It's simple. It's effective. Counterweighted secondary carburetors utilize a heavy, non-adjustable "counterweight" that relies solely on the velocity of the air coming through the secondary venturis to roll open the secondary air door. Under certain conditions, a delay or stumble can occur when transitioning between the primary and secondary circuit at Wide Open Throttle (WOT). This is due to the velocity not being able to roll the air door open fast enough. This condition is virtually eliminated with the AVS feature.
650 cfm AVS Carburetors
Manual or Electric Choke
Designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes: Metering Jets ?Primary .095, Secondary .098; Metering Rods ?.068 x .047; Step-Up Spring ?Orange (5" Hg). Use Carb Studs #8008 or #8024 if needed, see Installation Items. For auto trans throttle lever adapters and more, see Tuning Accessories.
650 cfm, square-flange, manual choke (non-EGR)
#1805
650 cfm, square-flange, electric choke (non-EGR)
#1806
Important Note: Manual choke AVS carbs cannot be converted to electric choke
650 cfm Off-Road AVS Carbs
Manual or Electric Choke
Designed and calibrated for optimum off-road performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap and other brands of similar design. Includes spring-loaded needles and seats for superior fuel control in off-road terrain. Includes: Metering Jets ?Primary .095, Secondary .098; Metering Rods ? .065 x .047; Step-Up Spring ?Orange (5" Hg). Use our Carb Stud Kits #8008 or #8024 if needed, see Installation Items. For auto trans throttle lever adapters and more, see Tuning Accessories.
650 cfm, square-flange, manual choke (non-EGR)
#1825
650 cfm, square-flange, electric choke (non-EGR)
#1826
Important Note: Manual choke AVS carbs cannot be converted to electric choke
800 cfm AVS Carburetors
Manual or Electric Choke
Designed and calibrated for optimum street performance in high-horsepower small-block and big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer RPM, RPM Air-Gap, Torker II and others of a similar design. Includes the following: Metering Jets ?Primary .113, Secondary .107; Metering Rods ?.068 x .047; Step-Up Spring ?Orange (5" Hg). Use Carb Stud Kits #8008 or #8024 if needed, see Installation Items. For auto trans throttle lever adapters and more, see Tuning Accessories.
800 cfm, square-flange, manual choke (non-EGR)
#1812
800 cfm, square-flange, electric choke (non-EGR)
#1813
Important Note: Manual choke AVS carbs cannot be converted to electric choke
|
|
|
|
|
|
