|
|
| Hookah Diving Regulators, Tanks, and Hose |
|
|
Alaskan diving conditions demand the best protection from extreme cold conditions. Hookah (surface air supply) regulators, diving hoses, reserve tanks, and fittings are available from Alaska Mining & Diving Supply. These items are used with a Hookah Air Compressor to supply air to a diver.
NO SHIPPING SURPRISES! - Every item is listed with the shipping & handling fee for Priority Mail Delivery in the United States. There is a $5.00 Small Order Fee for orders of less than $25.00. We do not ship outside the United States. See details here
Common hookah diving setup (less compressor and mask)
Pictured:
KEHC1 Air Hose Connector
KERT1 Low Pressure Reserve Tank
KEAH20 20 Foot Hookah Hose
KEH2 Hookah Harness
KER1 Hookah Air Regulator
Low Pressure Air Systems
This picture shows a common low pressure air delivery system. It includes a reserve tank, 20 feet hookah hose, harness, regulator, and fittings. Compressor not included. For use with breathing air compressor systems delivering air at up to 60 PSI (Maximum pressure of marlex reserve tank). Note: you can build alternative systems with longer hoses or different tanks by using the individual items below. Another item often used with this system would be a full face mask.
Hookah Air Regulator
Low pressure hookah diving regulator. Designed for easier breathing at a lower working pressure for smaller, low pressure air compressors delivering air at up to 125 PSI. This regulator is not compatible with SCUBA gear. Mouthpiece may be removed so that the regulator may be fitted to a full face mask.
Part#KER1 $129.95
Plus $5.00 S&H if ordered on website - See details here
Hookah Harness
Harness consisting of an adapter to make the regulator to the air line and a quick release buckle. A harness is a must for safety, as it prevents pull on the regulator and keeps air line out of the divers way.
Part#KEH2 $35.95
Plus $3.00 S&H if ordered on website - See details here
Hookah Diving Air Hose
Kink resistant 3/8" breathing air hose. It is a bright yellow for extra visibility. The hose floats, reducing the possibility of entanglements on the bottom. Complies with OSHA federal regulations for breathing standards. Coupled with 1/4" female ends. Maximum work pressure 250 PSI.
Part#KEAH20 20 ft. $34.95
Plus $10.00 S&H if ordered on website - See details here
Part#KEAH30 30 ft. $49.95
Plus $15.00 S&H if ordered on website - See details here
Part#KEAH50 50 ft. $79.95 Temporarily Sold Out!
Plus $20.00 S&H if ordered on website - See details here
Low Pressure Reserve Tank
Three gallon corrosion-proof marlex polymer reserve tank. 1/4" male fitting on one end, 1/4" female fitting on the other end. Maximum pressure 60 PSI. Normally used with KET80 air compressor. Weight 5 lbs.
Part#KERT1 $59.95
Plus $10.00 S&H if ordered on website - See details here
4 Gallon Stainless Reserve Tank
Four gallon stainless steel reserve tank. Recommended for one or two divers. Working pressure 125 PSI. Equipped with two 1/4" ports. Weight 7 lbs.
Part#KERT4 $159.95
Plus $15.00 S&H if ordered on website - See details here
9 Gallon Stainless Reserve Tank
Nine gallon all stainless steel reserve tank. Equipped with two 1/2" ports and one 1/4" drain port. Recommended for commercial divers who need equipment that will last a life-time. Working pressure 125 PSI. Weight 12 lb.
Part#KERT9 $279.95
Plus $25.00 S&H if ordered on website - See details here
Air Hose Connector
Flexible hose connector for T80 air compressor. Connects air compressor to reserve tank. Includes one male 1/4" pipe fitting and one female 1/4" air fitting, 2.5 feet long. Not for use with KE263 compressor.
Part#KEHC1 $11.95
Plus $2.00 S&H if ordered on website - See details here
High-Temp Air Hose Connector
Flexible hose connector for all high pressure air compressors that output air at higher temperatures. Normally used with the KE263 air compressor to connect to the reserve tank. Includes one male 1/4" pipe fitting and one female 1/4" air fitting, 2.5 feet long.
Part#KEHC1ST $19.95
Plus $2.00 S&H if ordered on website - See details here
1/4" Brass Air to Air Connector
This brass fitting is used to connect multiple lengths of hookah hose together. For instance, the KEAH20 and KEAH30 hose could be connected together to form a single 50 foot length. The 1/4" male x male brass fitting has the correct thread and seat for the female connector used on the hookah hose.
Part#KEA5A $3.95
Plus $0.50 S&H if ordered on website - See details here
1/4" Air to Pipe Connector
This brass fitting is used to connect hookah hose to 1/4" pipe fittings, such as tee or cross fittings. The brass 1/4" male air x 1/4" male pipe fitting has the correct thread and seat for the female connector used on the hookah hose on one end, and standard pipe thread on the other end.
Part#KEA5B $2.95
Plus $0.50 S&H if ordered on website - See details here
1/4" Brass Pipe to Pipe Connector
This brass fitting is used to connect 1/4" pipe fittings together, such as tee or cross fittings. The brass 1/4" male pipe x 1/4" male pipe fitting has standard pipe thread on each end.
Part#KEA5C $2.95
Plus $0.50 S&H if ordered on website - See details here
1/4" Female Brass Pipe to Pipe Connector
This brass fitting is used to connect 1/4" male pipe fittings together. The brass 1/4" female pipe x 1/4" female pipe fitting has standard pipe thread in each end.
Part#KEA5D $2.95
Plus $0.50 S&H if ordered on website - See details here
1/4" Brass Pipe Elbow
This brass 90 degree elbow fitting has a 1/4" male pipe fittings on one end and a 1/4" female pipe fitting in the other end.
Part#KEA5E $3.95
Plus $0.50 S&H if ordered on website - See details here
|
|
|
|
|
|
