|
|
| Swingaxle to IRS Conversions - Sandrail |
|
|
Sand rail IRS Conversion with this Jig
The first thing we needed to do when we started the stock conversion is to make a new jig. The jig we made for the sand rail worked great, but did not clear the stock upper shock mount. It would work one way, but not the other. So we dragged out the IRS torsion housing again and proceeded to modify the jig. We needed to extend the support arm so it cleared the upper shock arm on both sides. After much deliberation on what we should use for the new arm we settled on what I tripped over. A couple cuts, some grinding and a bit of welding and the new jig was ready to go.
|
|
|
|
|
|
